• Compare Products
Toggle Nav
Search
| Request a Quote
1.800.323.0244
Menu

X3 Finder

The X3 Finder is a heartbeat and respiration detection system designed for military, law enforcement personnel and search and rescue. X3 Finder can see thru walls up to 18 inches thick and provides critical information about the presence of life and its location.
SpecOps Group Inc.

SpecOps Group Inc.

View more by SpecOps Group Inc.

Making the world a safe and secure place is a complex, high-risk challenge. At SpecOps, our mission is to equip our customers with the tools required to protect their people, their property, and those who protect them.​

X3 Finder
X3 Finder

X3 for Law Enforcement and Military Applications

  • Scans and sees thru walls and buildings to detect multiple heartbeats and respirations
  • Scans small boats for stowaways and human trafficking
  • Scans caves, tunnels and mines for terrorists and drug traffickers
  • Scans containers, trucks and lorries
  • Can be mounted on robot for safe breaching
  • Pre-tactical assault provides verification of human life inside buildings, vehicles, boats
  • Search and Rescue - effective detection of trapped or injured people
  • Breaching so law enforcement can plan for effective and safe entries
  • Force Protection verify if humans are in the area

For Search & Rescue & Firefighters

  • Scan and locate humans in collapsed buildings, trapped inside or under rubble
  • Scan and locate humans in mines, caves, vehicles
  • Scan for human life in avalanches, earthquakes, tornadoes
  • Scan for lost humans, children, and Alzheimer patients in open areas

Finder Features & Specifications

The systems sensors are encased in an impact and IP67 rated case for all weather conditions. X3 Finder is man portable and designed specifically to fit in any overhead compartment for air travel. SpecOps innovations are driven and developed by First Responders for First Responders with the following features in mind.

  • Detection of life signs up to 91 meters
  • No setup time
  • 24-hour standby time
  • Scans for a full 12-hour shift
  • Fully charged in two hours or swap battery
  • Simple design familiar to First Responders
  • Operates remotely as a standoff device
  • Single user setup and operation
  • Minimal training needed to operate
Specifications Description
Model X3 Finder
System Type Low Emitting Microwave Radar
Radar Antenna Array 1 transmitter and 4 receivers
Operating Wavelength 3.15 GHz
Wavelength Ranges 2.4, 3.15, 5 GHz
Beam Width 70° cone
Radioactivity Meets the ICNIRP-1998 radiation exposure requirement
Wi-Fi IEEE 802.11 b/g/n
Power Supply Charging system, 4-cell, 2.8A @ 12.8V LiFePO4 charger
Battery LiFePO4 13.2V 5sh, 66Wh
Scans Per Charge 50-100 depending on battery capacity installed
Standby Time 24 Hours
Length of scan i7 Proc 90 sec, i5 Processor 120 sec on average (varies by scan settings)
Life Sign Detection Multiple victim detection ability
Target Types Loose debris, dense debris & solid debris (concrete), open areas, limited building
Dense Debris Penetration Up to 9 meters (30 feet)
Solid Object Penetration Up to 45cm of solid concrete (18 inches)
Clear Air Range Approximately 9m-100m (30-330 feet)
Temperature range Ranges from -20 (+50 )
Display Windows Based Weather Proof Tablet or Laptop
Enclosure Seahorse 540SE, IP67, MIL-STD810F512.4
Available Colors Safety Yellow (OSHA) Intl. Orange (SOLAS), Forest Green Camo, Gunmetal Gray
Dimensions 14.9 x 12.13 x 9.58" (37.85 x 30.81 x 24.33cm)
Weight About 6kg (13lbs) depending on installed options
1.800.323.0244
Get a Quote
My Cart